XL Type Low Voltage Drawable Power Distribution Cabinet Transformer Switchgear

• Certification: ISO9001
• Shell Material: Stainless Steel
• Voltage Level: Low Voltage
• Installation: Removable
• Structure: Cabinet
• Current: AC
• Model NO.: XL
• Application Range: Power Plants
• Rated Insulation Voltage: 660V
• Rated Voltage of Auxiliary Circuit: AC 220, 380 (400), DC 110, 220
• Rated Frequency: 50Hz
• Enclosure Protection Grade: IP30, IP40
• Transport Package: Plywood Case
• Specification: can be customized
• Trademark: LIPENG ELECTRIC
• Origin: Zhejiang, China
• HS Code: 8537209000
• Production Capacity: 2000 Sets/Week

Product Description

XL Type Low Voltage Drawable Power Distribution Cabinet Transformer Switchgear 

Product Description

The XL low-voltage power distribution cabinet is suitable for power distribution in three-phase four wire or three-phase five wire systems with an AC voltage of 500 volts or less in power plants and industrial and mining enterprises. The XL type low-voltage power distribution box is installed against the wall for indoor installation and maintenance in front of the screen.

Working conditions
Environmental temperature: -50 ºC~+40 ºC, and the average temperature within 24 hours does not exceed+36 ºC;
Altitude: not exceeding 2000m;
Relative humidity: not exceeding 50% when the surrounding air humidity is+40 ºC;
At lower humidity, there can be higher relative humidity (such as 90% at+20 ºC), allowing for moderate frosting due to temperature changes;
The inclination angle between the equipment and the vertical plane during installation should not exceed 5 °. The equipment should be installed in a place without severe vibration, impact, and corrosion.

Use, maintenance, and repair
After installation or maintenance, the power distribution box must undergo the following inspections and tests before being put into operation (the inspections and tests after maintenance depend on the quality of the maintenance).
Check whether the electrical equipment and secondary wiring installed inside the power distribution cabinet meet the requirements of the drawings.
Check if the knife switch and air switch used for operation are flexible and there should be no jamming or deformation.
Check whether the contact of the installed electrical equipment is good and whether it meets the usage requirements of the electrical equipment itself.
Check if there are any other foreign objects inside the power distribution cabinet and if the sturdy screws in each part are loose.

Product Parameters

 

Number	Name		Parameter
1	Rated voltage of the main circuit (V)		Communication 400/660
2	Rated voltage of auxiliary circuit		AC 220, 380 (400), DC 110, 220
3	Rated frequency (Hz)		50(60)
4	Rated insulation voltage (V)		660
5	Rated current (A)	Horizontal busbar	≤5000
	Rated current (A)	Vertical busbar (MCC)	1000
6	Rated short-term withstand current of busbar (kA/1s)		50,80
7	Rated peak withstand current of busbar (kA/0.1s)		105,176
8	Power frequency test voltage (V/1min)	Main circuit	2500
		Auxiliary circuit	2000
9	Generatrix	Three phase four wire system	A.B.C.PEN
		Three phase five wire system	A.B.C.PE.N
10	Protection grade		IP30.IP40

Detailed Photos

Product Features

Adopting intelligent controller control, with complete functions, reliable performance, and automatic compensation mode: the power factor can be increased to 0.9 or above;

Real time display of power factor of the power grid, display range: lagging (0.00-0.99), leading (0.00-0.99);

It has multiple comprehensive protection functions such as overvoltage, harmonic, overcompensation, system fault, phase loss, overload, etc;

Memorize the set parameters, and the system will not lose the parameters after a power outage. After the power grid returns to normal, it will automatically enter the operating state without the need for personnel to be on duty;

According to the load balance of the power grid, phase separation compensation or mixed compensation can be adopted;

Strong anti-interference ability, able to withstand direct input of 2000V disturbance pulses from the power grid, higher than national professional standards.

Company Profile

Lipeng Electric Co, Ltd. is specialized in the research and development, as well as the production and manufacturing of power transmission and
distribution equipment such as cable tap connections, high and low voltage switchgear, box type substations, and switching stations. The
company has a group of high-quality technical management talents, with over 30% of R&D personnel holding intermediate or higher
professional titles, and over 20% of management personnel holding intermediate or higher professional titles. By adopting modern information technology and fully implementing lMs (Computer Integrated Manufacturing System) and PDM (Product Data Management System), the production and management capabilities of enterprises have been elevated to a new level.

On the basis of obtaining mandatory 3C certifcation and ISO9001 guality management system certification in China, the company has also
passed lS014004 environmental management systerm certification and ISO45001 occupational health and safety management system certifica
hon. The product is widelv used in maior eneineering proiects both domesticalvy and internationaly, invoiving industries such as power trans
portation, steel metallurgy, petrochemicals, national defense industry, communication, environmental protection, and construction, and has
received widespread praise from users.

FAQ

1.A: Are you manufacturer?
   Q: Yes, we are manufacturer. Our factory is in Guangzhou City, Guangdong Province.

2.A: Can I get guarantee of products?
   Q: Yes, every product is 1 year quality warrantee under customer correct using the products.

3.A: Do you have any Certificate?
   Q: Yes. Each of our unit has CE, 3C and KEMA certificate. lf you need any other Certificate, we can help you to apply it.

4.A: How can l pay you?
   Q: Pay by T/T and L/C is acceptable.

5.A: What about the production?
   Q: In general, it take 4~6weeks and it depend on the different style.